822 30x32x10 board and batten garage
Most garage and workshop buyers get overhead storage they can only reach with a pull-down ladder, which works fine until you need to carry something heavy up there. This owner wanted a loft space they could actually use, so real stairs went in instead of a ladder. 822 30x32x10 keeps the rest straightforward: a 960 square foot attic storage garage on the main floor, a full attic floor on top of it for storage, and a lean-to along one eave that adds covered space without touching the main footprint.
Searching for pole barn builders near me? You’ve just found the best. Pioneer Pole Buildings is the trusted name in post-frame construction across the Mid-Atlantic. Our team delivers high-quality craftsmanship, tailored customization, and dependable service on every project.
Why Choose Pioneer?
Pole Buildings, such as the one you’re looking at, provide exceptional versatility and value. Here’s why this structure stands out for homeowners in the mid-Atlantic:
- Cost-Effective Construction: Post-frame buildings require fewer materials than traditional methods, lowering costs while still maintaining strong structural integrity.
- Quick Installation: With Pioneer’s streamlined process, your garage can be completed in weeks, not months.
- Durability for Weather: The 28-gauge Frontier Panel siding and roof, backed by a 50-year warranty, stand strong against snow, wind, and rain.
- Flexible Interior Layout: From parking to a home workshop, the ceiling height and open floor plan adapt to your needs.
- Low Maintenance: Metal materials require minimal upkeep, saving you time and money in the long term.
Looking to personalize your structure? We make it easy to explore a wide range of Options and Customizations, including 18 Color Selections, premium upgrades, and add-ons that reflect your goals.
Explore Building 822 30x32x10 attic storage garage
Look at the two long sides of this board and batten garage, and the eaves read almost the same, even though the construction differs. The main roof stops flush on the lean-to side, since the lean-to has its own foot of overhang and takes over covering that wall. The opposite eave has no lean-to to hand off to, so the main roof carries its own overhang directly on 822 30x32x10.
The gable photos show the 12×10 split slider finished in the same unstained board and batten as the walls, so the door reads as part of the siding, not separate from it. The 36-inch cupola is there mainly for the roofline; it lets a little air through, but the ridge vent handles the actual ventilation. Sizing your own 30×32 pole barn? Borrow that pairing on a loft garage: a slider that blends in, a cupola that earns its spot on looks.
Whether you’re planning a personal garage, backyard workshop, or something more specialized, this Pole Post Frame Building offers a smart foundation for inspiration. You can also explore even more real builds in our full Project Gallery to see what’s possible with Pioneer.
Personalize your 30×32 pole barn
At Pioneer, customization is at the heart of every project. This Pole Barn Build offers a strong foundation, but you can make it your own with a range of options:
- Color Choices: Select from 18 Colors for siding, roofing, and trim that complement the aesthetic of your home or property.
- Door Upgrades: Add larger overhead doors, glass panels, or automatic openers with smart home compatibility for convenience.
- Insulation Packages: Upgrade to premium insulation for year-round comfort, ideal for workshops or climate-controlled storage.
- Interior Features: Incorporate shelving, lofts, or partition walls to maximize usability and functionality.
- Exterior Add-Ons: Add skylights, cupolas, or extended overhangs for enhanced style and functionality.
Visit our Building Visualizer page to design your own Post Frame Building that perfectly fits your vision and needs.
Building Specifications
This attic storage garage moves storage into the roof structure instead of the walls. 822 30x32x10 rests on 3-ply 2×6 glulaminated poles set 8 feet on center, carrying 30-foot attic trusses at 4/12 pitch, 2 feet on center, engineered to Pennsylvania snow load. A 3/4-inch tongue-and-groove attic floor spans the full truss bay, reached by stairs instead of a pull-down ladder, and a 32-foot universal ridge vent runs the peak to keep the loft from trapping heat.
Unstained white pine board and batten wraps the walls under a Black 28-gauge Frontier Panel roof with a 50-year warranty, over a 2×6 .60 treated skirtboard. The 12×10 split slider is finished in the same unstained board and batten, set into the gable, alongside a 3068 fiberglass entry door and five single-hung windows. The eave under the lean-to sits flush on the main roof, since the lean-to’s own roof carries its own foot of overhang instead, while the opposite eave gets its overhang directly off the main roof.
Project Details:
- Project ID: 822
- Location: Pennsylvania
- Dimensions: 30’W x 32’L x 10’4″H
- Type: Garage / Workshop
Building Colors:
- Roof Color: Black
- Siding Color: Board and Batten White Pine (unstained)
- Trim Color: Black
- Man Door Color: Primed White
- Window Color: White
- Soffit Color: White
- Split Slider Color: Board and Batten White Pine (unstained)
- Cupola Center Color: White
- Cupola Roof Color: Black
- Cupola Base Color: Black
Construction Features:
- Siding: Board and Batten White Pine
- Roofing: 28-gauge Frontier Panel (50-Year Warranty)
- Poles: 3 ply 2 x 6 glu-laminated, poles 8′ on center
- Trusses: 30′ Attic Trusses, 2′ on center, 4/12 pitch, snow load by code and design
Openings & Access:
- ( 1 ) 12’W x 10’H Split Slider Non-insulated w/white frame
- Slider Placement: gable
- Color: Board and Batten White Pine (unstained)
- ( 1 ) Entry Door 3068 inswing 6-panel RH Fiberglass Insulated PRIMED
- ( 5 ) Window 3W 4H Single Hung Insulated White with Screen/No Grids
Overhang Details:
- Eaves 1: Flush
- Eaves 2: OH 1′
- Gables 1: OH 1′
- Gables 2: OH 1′
- Soffit Material: Vinyl
Additional Features:
- Attic Floor 3/4″ T&G
- ( 1 ) Stairs 8′ to 10′ high
- 32 ft, Universal Ridge Vent
- ( 1 ) 36″ Cupola w/ louvers
- Roof Color: Black
- Center Color: White
- Base Color: Black
- 2 x 6 Skirtboard .60 Treated with barrier tape
- Lean-to Eave 1
- 10′ W x 32′ L x 10′ 4″ H
- Pitch 2/12
- Roofing: 28 Gauge Frontier Panel
- Eave 1: OH 1’
- Gable 1: OH 1′
- Gable 2: OH 1′
- Pole Spacing on the lean-to will be 8′ on-center.
Types of Buildings We Construct
Inspired by this build? Pioneer specializes in post-frame construction for nearly every application:
- Agricultural Pole Barns: Designed for livestock, equipment, and storage
- Residential Pole Garages: Like this featured build, perfect for everyday use
- Commercial Pole Buildings: Scalable layouts for growing businesses
- Event Barns & Pavilions: Seasonal venues for weddings or gatherings
- Recreational Buildings: Cabins, gyms, and creative hobby spaces
- Equestrian Barns: Functional, horse-ready layouts
- Specialty Pole Barns: One-of-a-kind designs built to fit your property
- Barndominiums: Rustic-meets-modern homes with efficient layouts
We proudly serve customers throughout Pennsylvania, New Jersey, New York, Delaware, Maryland, West Virginia, and Virginia, providing reliable, locally tailored service from the ground up.
Frequently Asked Questions
How much space does a 30×32 pole barn give you?
822 30x32x10 puts 960 square feet on the main floor, plus another 320 square feet under the lean-to. The attic floor adds another full 960 square feet of loft storage on top of that.
Why doesn’t Pioneer list pole barn pricing online?
Pole barn cost depends too much on the scope to publish a number. On Project 822, the attic trusses, full attic floor, stairs, and lean-to each have to be quoted independently.
What’s the point of a cupola on a garage like this?
A cupola’s main job on this build is the roofline look, not ventilation, though it does let a little air through. The 32-foot ridge vent is what actually handles airflow for the loft garage.
Does Pioneer build garages in Pennsylvania?
Yes. Pioneer has built more than 30,000 post-frame buildings across the Mid-Atlantic since 1998, and our Pennsylvania garage builders work across all seven states served.
Pricing & Financing Options
A garage workshop with a full attic floor doesn’t price like a basic two-car garage. 822 30x32x10 carries 30-foot attic trusses at 2-foot spacing to hold that loft, a full tongue-and-groove attic floor, real stairs instead of a pull-down ladder, and a 10×32 lean-to with its own roof pitch. Each of those is a separate line item, since attic trusses engineered for foot traffic and storage load price differently than a standard roof truss.
Pioneer prices off actual scope, not a square-foot shortcut. The decision worth making before requesting a quote on an attic storage garage like this is how much loft space you actually need, since that drives both the truss spacing and the stair placement. Our Pennsylvania garage builders can walk through that math for your own loft garage once you know what it needs to hold, and whether a lean-to like this one fits your site.
We also offer flexible Financing Options so you can get started without compromising on design or quality.
Call us at 1-888-448-2505 Ext. 136 or Request Your Free Quote today to take the next step.
Connect With Us
Follow Pioneer Pole Buildings on Instagram, Facebook, and LinkedIn to see more featured builds like this one, get inspired by real projects, and learn from our expert tips and behind-the-scenes content. Whether you’re a homeowner, builder, or curious observer, there’s something for everyone in our growing digital showcase.
Instagram, Facebook, & LinkedIn
#BoardAndBattenGarage #PennsylvaniaGarage #PoleBarnGarage #PostFrameBuilding #BuildingOfTheWeek
X / Twitter
#PoleBarn #PennsylvaniaBuild #GarageWorkshop #BuildingOfTheWeek
Final Thought
The takeaway from 822 30x32x10 isn’t the attic floor or the stairs. It’s the decision to leave the board and batten siding unstained. Most owners paint or stain board and batten right away to lock in a color and add a layer of weather protection. This owner skipped that step on purpose, choosing the rustic, silvering look raw pine develops over time instead of a finished color from day one.
That decision doesn’t change what Pioneer frames, but it does change what the owner signs up for after handoff. Unstained pine weathers unevenly at first, the sun-facing walls gray faster than the shaded sides, and it takes a few seasons before the color settles evenly across the whole building. Staining now would have evened that out immediately; skipping it trades a uniform look today for the character that only comes with time.
Pioneer has built more than 30,000 post-frame buildings across the Mid-Atlantic since 1998, and Pennsylvania is one of seven states served. Our Pennsylvania garage builders build board and batten both ways, stained and left raw, and can walk through what each one means for maintenance before the siding ever goes up on your build.
Ready to get started? Explore our full range of options and Request Your Free Quote. We’re here to build what matters most to you.